The UK's biggest automatic scooter forum.
Separate names with a comma.
You could all way's keep both scooters, best of both worlds!
You could fit a shorter rear shock absorber and drop the front forks through the yokes, possibly an inch or so. And cut the foam out the seat base!
The LML is faster than a Vespa 125 out the box as the LML has a reed valve engine not rotary like the Vespa. Plus the LML is a 5 port barrel NOT 3...
The 24/24 carb is a 200px if I remember right, the std 200 jet is 118! You need to check the colour of the spark plug, it need's to be a real...
Have a look at a 125 Typhoon or Runner 2t and you'll see how it's done, you only need some box section steel/welder and a bit of measuring.
2 stroke a/c single cylinder, carb'd 124cc, 9ps (12bhp ish). Have you fitted the engine properly to the zip using a silent block/scissor joint...
Is it a 2t or 4t? Try a new plug.
Eleventy billion is quite fast by anyones std! :D
Did you change the head? with the big bore kit's they sometimes come with a head machined to suit the bore. it may have too high compression...
I'd put the std airbox on, around a 92 main jet.
As far as I know all the piaggio fork tops are the same size.
I'd go with a new set of std forks as the vx forks are to long, to soft and look all wrong. It may be the norm to fit vx forks , but it does'nt...
What performance gain where you expecting? Just re-jetting will improve it slightly as they run very lean, an after market pipe won't do anything.
It would only cost £10-20 as it's only a machined hole, the runner crank cases are the same as typhoon so in theory you could just use the runner...
You need to have the r/h engine case machined to accept the metal bottom hose, run an electric water pump/rad etc. Some would say just use a...
Adjust the oil pump slightly rich on the cable adjuster!
I had an Rg125 back in 85 or there about's, cost £1025 plus a fibreglass belly panel.
Delortto jets are measured in mm, a 50 jet is 0.5mm, 75 is 0.75mm etc. Usually jets go up in increments of 2, you may need to down jet a little...
I'm in Leicester. I would be willing to break if enough inquiries ?
Sold. Cheers.
