The UK's biggest automatic scooter forum.
Separate names with a comma.
Yes, as you've probably found the outer spacer is only held in a little. When you drit the bearing out, work round the bearing not just on one side.
All you need is a drift (long steel bar)and hammer to knock them out, put the bar through one bearing lever it over slightly to move center spacer...
I do believe they are! I'll get a new shock for the back as well.
I don't know really, just to be a bit different I suppose, the original forks are crap as you know so thought I'd do something else for a change,...
I'm a sunglasses person.
A little update on the twin, new front end just about finished.[ATTACH][ATTACH][ATTACH][ATTACH][ATTACH]GT 125 forks cut n shut a little to...
It should'nt need such a big jet, a 180cc 2t runner uses a 90 main jet. What's the plug colour after a good thrash?
The std 12.5g would work ok, don't bother with Malossi as they wear out to quick! I can't do a link as I don't know how to.:oops:
Fuel pump problem? Fuel starvation maybe? Some early gt/ gt's had a recall on the pumps! Lamba sensor in need of a clean?
Have you got the oil pump a bit on the rich side?
L/H side on the underside of frame.
Look on ebay Germany/France, there's plenty on there!
Have a look in the "Visual modifications" forum and look for my "Typhoon 125 with big wheels" 12+13" wheels. The Mc2 wheel fit's straight into...
You need the NRG Mc2 front wheel or make a caliper extension bracket.
I had an Honda ss50 in 81".
That's because they are shite! Fit the std headlight and it will be fine.
Any clear silicon from Halfrauds, small toothpaste size tube, it's heat resistant and works well!
Nothing to worry about, they all do it. Take exhaust off and use some clear silicone on the gasket joint.
Yep!
Look's like burnt 2t oil, maybe blowing out the exhaust joint/barrel?
