The UK's biggest automatic scooter forum.
Separate names with a comma.
Yes, the green relay!
The Lexmoto Diablo 125 uses this engine so you could try CMPO and see if they list anything, the top end is very similar to the SYM / Kymco 4t...
Take the clutch apart and clean/lube the 3 pivots for the clutch shoes, they become very dry and seized.
Don't take it to a bike shop as they know nothing about scooters, scooter shops are far better! Try locating a scooter club near to you and ask if...
I had a similar issue some years ago, it turned out to be the cdi, it had like a default and would only run at tickover like a "get you home"...
I'd set the mirrors correctly so you can see what's behind you! :D
It won't come with a tap and no, it's probably not a good idea to use it.
A new fuel tank would probably the best solution!
No, leave the std air filter on!
The std airfilter works fine, any after market filters will make the engine run differently and will need adjustments/jetting etc.
It sound's to me your dropping to many gears or letting clutch out to sharply.
Torque wrench!
The runner 50 front wheel has the same hole for speedo drive in it as the typhoon wheel, I'll have a look for the caliper extension. Any half...
The secondary gear-up is pressed onto the rear axle, you need a 10 ton press to remove and refit the gears. As for the front wheel, the early 50...
Change the wheels to 12", runner fx/fxr rear and early runner 50cc front, better choice of tires!
Fit new pads, take scoot for a run without using rear brake, feel if the disc is hot to touch, if it is then it's binding and the caliper will...
I thought I'd share some of my Top Tips with you, please add to the list if they could be of help to other members. 1. 4t leader engine oil...
Buy the silent block rubber bush+spacer tube, get some steel tube the same diameter as the silent bush/same width, cut tube and weld on two m8...
Give them a wire brushing and they'll be fine.
Yes, any will do!
