The UK's biggest automatic scooter forum.
Separate names with a comma.
Use copper slip on it when you replace it, it will come come off easy next time!
Yes, don't worry about it. 4t engines have a breather off the rocker box to air filter and blow out small amounts of oil into the airbox.
Reed petals?
Like Slider Tom said, do it right.
I could repair it for you, have a think on what you want to do with it, new frame or repair, a real shame to scrap a usable frame!
Sell it me!!
It can be welded and mot ready, if you can't do it I can! I put some photos of my typhoon that I repaired, type in the search box rusted frame...
If it all measures up the same, then it should work.
The oil pump is no problem, just advance it a little. The squish area is a band around the edge of the head that squeezes air/petrol mix into the...
On a air cooled engine the squish need's to be at least 1.0 mm I'd say on a street engine!
The rollers do go in the variator a certain way with the drive side to the left but there's a lot of scooters that rattle on tickover, don't worry...
86, 6mm.
Start with a 115/120 ish and work down until it runs without bogging down on full throttle !
I'm sorry to hear that, he'll learn and no worries. cheers.
Yes they do look bent, you'll need to check frame as well, measure it against the other typhoon, measure from top bearing to where the seat bucket...
I think he means the egr system, does it all connect to the exhaust? Disconnect all pipes and block them off making sure no leaks on the inlet...
I've got a SYM jet 4 125, 2013 reg, 17,000 miles. It will have a new front tire, good rear, new drive belt, 12 months MOT! In Diamond white, no...
Take the top caps off.
Tighten the pinch bolts up and undo the top caps on each fork leg, they may be allen key type, undo them keeping pressure on them as the fork...
To be honest I've been dragging my arse, I've put the front panel on, air filters but not much else. I know I need to get it sorted but I 've got...
