The UK's biggest automatic scooter forum.
Separate names with a comma.
How about a Kymco agility city 125 or SYM simply sr 125? Both are brilliant scooters, if someone say's there crap then they don't know scooters or...
Does the engine case have brake caliper lugs?
Then in that case if it was mine, I'd open the 4 bolt holes a little bigger 1/2 mm should do, don't over tighten bolts as they are shouldered! The...
Replace skull cap for a new one and new seal.
Be aware that these SYM's are very good, this is an old model and spares may be a problem!
It should be on the R/H side of the frame just under the bodywork and your right foot.
Why not spend a bit of money sorting it out and keep it, far cheaper than running a car !
I've seen these fork's for sale, do you realy think there good ? What about over a new set of original forks? Buzzetti forks were crap, way to...
6mm, start with the biggest jet and work down in size until it work's !
Strip and lube the clutch shoe pivots to stop it "snatching", BE AWARE OF THE CONTRA SPRING!!
Yes a bigger main jet but you can use all the std transmission.
The std main jet will probably be a 53 or 56, up it to a 58 or 60, start big and work down on jetting.
It's only a 190cc barrel/piston kit that's it, nothing else. Simple!
A 4v head won't work as there water cooled, fit a 190cc barrel !
Valve clearance?
Use a Derbi gp1 250 carb.
Take the petrol tank off to check all electrical plugs/joints, I had one where the indicator relay had one wire worn through touching down to earth!
Zip/et4 125's should be the same.
No it's different.
I personally fit bearings to cases first then crank, also have a pile of washers/spacers to help pull the crank in if you don't get it in fast...
