The UK's biggest automatic scooter forum.
Separate names with a comma.
I would argue with the Piaggio /Gilera statement, many parts are no longer available new so second hand parts may be as bad as the one already have !
If you buy second hand be sure to get low milage with good service history. SYM /Kymco are worth looking at, Taiwanese quality that will last ....
Yamaha vity ! Any SYM or Kymco, Honda model.
I don't know! tell me what you want for it inc p+p ? I'll pm you with my details.
No separate feed to crank/bearings.
Fit a new pump, the mist of oil entering the engine lubricates everything !
That must be a fx/fxr runner wheel? 5 holes on the the front side ? how much?
It could be a number a faults, we need more details, is the auto choke working?
You could pre-mix but the std system work's perfect, it lubes the bearings / piston no problem.
It need's to be 140mm diameter drum ! cheers.
And a gear kit or buy a 125cc !
If there's no lip to knock it out then as I've done in the past is to grind the race out using a Dremmel with the small fibre cut off disc's, it's...
Hi, I need a 10 " typhoon rear wheel, later big drum type. cheers.
Can you put a picture up of the bottom race ?
You need a long bar with a bend at the end to reach the bottom race, it can be difficult but doable. The race on the forks are just a tight fit...
Any descent recovery company will collect it with no major problem, lift the front and "wheel barrow" in onto the truck !
Using a multi meter on AC voltage.
Check the choke to see if it's working by connecting to 12volt dc, it should get warm and the needle extend a few mm, if it does then refit and...
It has a later aftermarket outboard front disc brake fitted ? If it has sx in the frame number and on the engine case and 1971 ish then I'd say 3k...
Don't waste your money on a loud, "no-go-faster" exhaust !
