The UK's biggest automatic scooter forum.
Separate names with a comma.
The correct std weight for the scooter.
Probably seized !
Take it to a Scooter workshop, a place where they only work on scooters and know how should work/ride.
Yes and a groove in the steering lock block !
There is a slim groove were the clip fit's, I can't get the block until tomorrow so you'll have to bare with me until tomorrow evening, you'll see...
3rd picture down look's to be broken, there is a wire clip that fit's in to hold ignition barrel, I'm sure I've got one so I'll have a look to...
On what ?
Replace the variator center sleeve, up-jet the carb and a little mod on the cdi. All available as a kit from your Kymco dealer. You will probably...
Measure up the rear hub/engine type, front forks etc, it can be done ! Put some pictures up.
The std will be ok with a 70cc barrel. Mine is a std 125, beryl is 15 y/o I've owned her from new, over 40,000 miles and still on the std crank....
Junk all that off and fit a 70cc barrel kit, std upjetted carb/std pipe. Lovely !
No , A bigger main jet would help if it's derestricted .
As you say it just goes into the belly panel, it's an inlet for air to cool the variator/clutch, if it's not kinked then it's ok.
Get a set of vx forks, or just the stem and try them in your skipper!
What grade of plug are you using?
183062947626.
There's one on ebay !
Why?
Just buy an original fitment complete pipe, will work as it should.
I don't think anyone on this forum will be able to help you !
