The UK's biggest automatic scooter forum.
Separate names with a comma.
The thickest goes on the crank between variator spacer/outer pulley, thin large diameter washer after pulley, kick start gear then smaller washer.
The cases are different, it's in the gearbox area. The non rolling case has a bearing at the end of the input shaft and gearbox cover plate, the...
It's the Italian way (piaggio) I'm not 100% sure but connecting both yellows on the 125 stator will probably short out ! Because it's a/c...
I don't think it will work, you'll burn it out. Just get a 125 typhoon loom!
Chinese Motorcycle Parts Online. Tanco, VR, sping to mind? It must be an old discontinued model.
Don't waste money on anything, your Kymco will never be fast, just derestrict it and buy bigger when you can, this may sound bad advice but it is...
Doe's it whine when just pushing it along with engine off? If so it could be a gearbox bearing or worn gears!
Carb diaphram?
The pivot link is the same as a vespa px, there's a factory tool to press them out/in, get it wrong and the alloy cracks !!
If you haven't got the right kit then leave it well alone, if there's no wobble/ free play work round it.
The belt does rub on the inside of the case from time to time, nothing to worry about. The wining could be gearbox driving the engine on over run,...
A bigger main jet will help.
I don't know what scooter you have but.... two bulbs wired in series won't be bright, wired in parallel they should be bright. All depends how...
Take it to a shop to get the brakes sorted if your not sure !
Measure the diameter of the threaded shaft and threads per inch, or use a thread pitch gauge then off to a nut/bolt supplier !
Keep the std pipe, there's very little to gain from a pipe on a 4t 125, cc is what you need !
As long as you sorted it, I've had to exactly the same in the past on various scoots !
What's the plug colour? It need's to be a dark chocolate brown!
You set the mixture by starting it, let the auto choke come off (5 mins) adjust mixture screw a little either way until it idles at it's smoothest...
Mixture screw need's a tickle, has it been de restricted?
