The UK's biggest automatic scooter forum.
Separate names with a comma.
Do you mean the mixture screw on the top of carb ?
Running lean on the mixture?
For that money you could get a KYMCO or SYM that would be much better !
Check valve clearance, it get's over looked due to being an arse to get the rocker box cover off !
Faulty voltage regulator?
De restricting the "moped" a 28 mph machine on a provisional licence, all the parts you listed would have made it illegal ! A 70cc barrel would be...
I'd say 3 !
I'd keep the enduro wheels in that snow !!
Excellent !
Take everything off, fit 70cc barrel with std up jetted carb+airbox, std transmission, std exhaust, nice reliable and not slow !
Just replace regulator for a start then stator if not improved, there not expensive.
Make a caliper extension bracket, search this forum on how I did mine.
The front wheel look's like a chinese model ? Changing the wheel will bring other problems such as speedo drive/spacers ! I have tried over size...
Valve clearance !
Get the piston upto top dead center, cam fully backed off and you should see marks on the cam sprocket that correspond to marks on the head casting.
I told my insurance years ago I had a "after market" exhaust as the original was so expensive and I just needed an exhaust for the mot, it was a...
It's usually the indicator switch loom that gets cut through but either will. You will need to take the plugs off indicator wiring, pull it up...
Check the wiring behind the horn cast and where the wiring loom runs up into the handlebars, the wires can get cut due to poor routing!
I'd have to agree with scubabiker, don't screw in the dipstick !
Then yes you have a major problem !!
