The UK's biggest automatic scooter forum.
Separate names with a comma.
As said, a good quality 70 kit (polini, malossi) and to be honest leave the rest alone, it will work great just upjetted to suit barrel.
Could be brake light switches, starter button, relay ? Get a multi meter and go through it.
Check your other pages !
It would be best to use tool, if replacing crank as well as bearings I always use a copper mallet to knock crank out !
You don't forget !
As said ^^^ get it warmed so choke is off, let it tick over and adjust mixture a 1/4 turn in/out, you'll hear the engine note change. Set it so it...
Has it been recorded as miles or kilometers ? Has the speedo been replaced due to a fault ? I've changed the speedo on my typhoon at 57,000 kms,...
What are you wanting to do ?
Both wheels best, but front wheel on ground would do for me, not a lot of difference really !
I've never seen one before !
It could be just a carb overflow pipe, check valve clearance. 0.004" inlet, 0.005" exhaust.
Vacuum petrol tap.
It should have a separate tank for 2t oil, probably under seat (ask previous owner) . Use a good quality 2t oil like ROCK or PUTOLINE semi...
Don't ever tighten with impact gun, only to undo.
Kill switch on handlebar, side stand switch ?
You can't fix engine to footrest, it will brake off when suspension moves up/down ! These engines are renound for braking on the exhaust mount. If...
Plug look's ok, head won't be a problem. P.S.I. should be around 100+/- I'm guessing. Stevep would know better.
No, it's wrong size. std is 55mm, Malossi is 65mm. Compression will be to high and piston may hit head.
Just take slide out and tap atomiser down.
Have you had transmission out ?
