The UK's biggest automatic scooter forum.
Separate names with a comma.
Best check engine spec on 2017 engine as it could be efi, your 2010 engine will be carb so it will be different. A new crank, oil pump,...
What are the ohms readings on the new stator? It's not usual to damage electrics just by fitting forks, yes a trapped wire maybe but that's it....
I've had my typhoon 125 21 years in march from new, still on the original panels all scratched up and my every day ride. Beryl as she's known is...
Make sure it has the correct choke unit, it should be a dellorto carb ? Variator spacer, exhaust branch and carb restrictor plate, std jet...
All depends on where you live, start with a big jet and work smaller.
Yes, you have answered the question, 2 strokes are very rare either due to people keeping them or there long gone due to being stolen, thrashed,...
The Malossi cast iron 2 ring barrel would work well with the std exhaust, just need to upjet carb a little. All the transmission as std.
Hi, anyone got a pair or even an odd light grey pillion foot rest for my early Piaggio skipper ? cheers.
Maybe no one knows ? I don't that's why i have'nt replied !
I used a gts front fork on a NRG, just cut stem off and welded using a steel slug into nrg stem to length, I made a post years ago on this forum...
Blocked pilot jet ? mixture needs adjustment ?
There's a diagram in the Haynes Manual.
The Honda is bullet proof and 100% reliable, Piaggio are great just as reliable but it all depends on the fit, try both for size and both will...
Check earth points, wiring on back of speedo.
How are you trying to start it? Ignition on, pull either brake lever then spess start button ? While it's cranking over give it a little throttle.
Tuning or any spare parts are very hard to find in the UK, it's such an old model as not many came here, my advise is to use it for what it is.
Is the pump jet working on carb ? Diaphram ok ? auto choke working?
Hi, I'm still looking for a good condition Kundo exhaust for my 125cc typhoon, anyone got one ? cheers.
Use 5w/40 fully synthetic oil, valve clearance too tight ?, OBD socket may be under seat bucket ?
The flange is bent up, over tightened, take it off to flaten it and check to see if it's the correct fit to barrel, if it is then use some clear...
