The UK's biggest automatic scooter forum.
Separate names with a comma.
Hi guys just wondering if anyone is breaking a speedfight 2 100cc I'm after the rear Torque Driver as I can't find 1 anywhere I've tried flee bay...
I've got the clutch i need the pulley where the belt goes
Ok so a little update I got the original gear pressed off and onto the new shaft put new bearing in rebuilt the gearbox and all is good it moves...
Yeah that's it I've just ordered another 1 hopefully this 1 will fit haha I'll find out Tuesday when it comes and you was right with the bearing...
Sorry to sound numb I'm a bit confused as to what you mean I have 3 washers in total 1 wave 2 normal this is the order they go on but the final...
I got 2nd hand off ebay it must be off a different year model
Ok so I stripped it all down again and tried a few different things the only thing that works is if I take the washer off the front and leave the...
Yeah there all the same size and thickness I can get it to spin freely but as soon as I nip the gearbox bolts up it goes stiff. All the bearings...
There was 3 washers on the middle gear 1 normal 1 on the front and a wavey 1 and normal 1 on the back withe the wavey 1 closest to the gear and...
Update I've now got it down to where it spins freely until I tighten the gearbox casing up
Yes to all of the above and ive had it all back out and it's something to do with the gearbox as now it's not moving freely all the washers and...
New clutch but put the old bell back on just to test it going to order a new bell soon but even with out the clutch on the back wheel is a little...
Ok so got my bearing and new final drive shaft put it all on and the back wheel doesn't spin as freely and sound like the clutch isn't engaging...
Should there be a washer between the the clutch bell and the clutch as when it turns it rubbs on the face of the clutch on these
This is my first scooter I've had and all other bikes I have worked on the exhaust pipe always sat in the cylinder a few mm so was just unsure on...
Yeah I did haha as I replaced the piston and cylinder and it dose go in without the washer
Is it normal for the exhaust pipe not to go in the cylinder it just sits against the gasket shown in the 1st pic
Personally I'd change it and get the 5mm × 9mm then it's all the same size and looks neater :)...
Here is the jet pack start from 80 and work down from there your best to buy a few spark plugs as well to do a plug chop test your aiming for a...
