The UK's biggest automatic scooter forum.
Separate names with a comma.
If your trying to re-paint a panel which has been painted already then you need to sand it all the way back down to bare plastic otherwise it may...
:welcome: welcome to scootershack
Foot boards are in the process of getting preped up aswell as a few other parts shouldn’t take that long to...
The inner panels aint hard to do at all really just need to rub them down alot to remove the bumpy feeling which they give off so its nice an...
I'll go an take a pic of one for you, i'll post it up in abit :pimp: [img] One of the little plastic bits is broken on this one, but this...
yeah it should fit fine mate. no worries ;)
Good bit of work mate keep it up. engine casing looks nice an shiney aswel ;) I'll get round 2 posting a pic of my one soon ( taken it off...
You should put abit of oil in your petrol for the time being, if you ran it out of oil.
I had a Nrg mc3 a couple of years ago 52 plate and it had the plastic type speedo drive ( no spacer needed ) This should answer your question :cool:
It should fit fine with the nrg speedo drive. EDIT: my mate had a runner 50 with the metal type speedo drive, he switched it for a plastic one...
Wet and dry all the way :D even though it takes long. Best way to achieve a good finish.
:welcome: welcome to scootershack.
seen that along time ago. Bet it takes alot of skill and practice to do it though :cool:
usually when u tend to wheelie a ped/bike they tend to get hotter alot quicker than usual so you may have done something to the engine. ( maybe a...
Well if you have got a nrg front wheel for your typh and it will not fit on as it has the metal speedo drive surely if you change this for the...
Alot of sanding and prep work, sanded between every single coat apart from the last. so far have come out mint ( should look even better once they...
All i do is wet an dry it takes long but well worth it in the end. No point in putting any sort of fluid on panels as it may re-act with the paint...
What you want to do to the inner plastics is sand them all over so that the bumpy feeling is out of the panels an it's smooth all over then filler...
Couple more picture's added :cool:
The panels was sanded down alot before the filler primer was put on, then about 3 to 4 coats of filler primer sanded down between coats to get a...
