The UK's biggest automatic scooter forum.
Separate names with a comma.
Can someone please tell me how to remove the old one and and fit a new rear suspension bush for the rear shock. I have removed the bolt but the...
Ok thanks. Yeah currently the bike is standard. Standard 20.5mm delly and std airbox. I will upgrade the carb later either to 25mm or a PWK style...
Yeah well it may not be a bad idea in general as the reason for having to change the standard cylinder and piston may have been due to it running...
Hi, I got a 172 kit in the mail today. I'm fitting it to a standard FXR180. In the instructions it states to advance the oil pump setting by...
I might be able to get an almost new Polini Evolution for a decent price. I have a standard clutch with aftermarket springs. They claim that these...
I have a Runner FXR180. The windscreen is too big and I hit my helmet of it sometimes. I have seem some pictures of Runners with a lower profile...
Yeah shaft spins freely. The inner ring does look a bit rusted. I've got a waterpump repair kit on order just in case and would just do it anyway...
I finally managed to get the waterpump cog off without damaging it too much. As I said previously the bike has been sitting for a while without...
Great advice, Cheers!
Thanks!!
Thanks. Sorry wasn't very clear in my post - do I need to make any adjustments to the flywheel/stator when putting them back on?
I took the flywheel cover off to check the seal there and there is oil all around there. I guess I'll need to change this seal as well. I've...
By cradle bushes you mean the 4 nylon ones right?
Really.. snapped engines? I've never heard of anyone having this kind of problem with uprated bushes. I just thought the may increase vibrations a...
Thanks guys. Will replace the cylinder and piston and also the crank seals. Tried to get the cog of the behind the waterpump just to make sure...
I have read that that engine bushes are the cause of poor handing, but then others say the silent block that sits between the bushes if the cause....
I was going to try to keep the std airbox and I think there is an inlet that allows this. Also standard exhaust. Should be similar main jet or one...
You got a good point there. Had a few problems with the std delly but there if definitely more info on the 25mm one out there than the PWK type...
Haven't bought it yet. Am tossing up between the two. Had just heard that the PWK style has slightly better mid range performance. Does seem...
The cylinder is a nikasil lined one. I don't want to have any more problems with the bike so tempted to either get a malossi 172 kit or replace...
