The UK's biggest automatic scooter forum.
Separate names with a comma.
Hello Mate, sorry I only just saw this thread but i'm Cambridge so if you need any thing picking up local in the future please let me know if I...
Before jumping in at the deep end you REALLY should read and educate yourself as to how the carb works and what part of the carb effects what part...
Hi, you can clean a spark plug with a wire brush and emery paper but will need a feeler gauge to reset the gap each time. You should check any...
Hi, there are a few different carbs as standard. Mine has a delorto 17.5 mm phva carb which takes the 6mm jets, in fact I bought the set your on...
Hi. Not sure on the aerox ones but on my old speedfight I fitted peugeot viva city front forks and wheel, which was very easy ,if I remember...
Thanks for the picture Terro, very helpful. I'm pretty happy with what I have done to the cases but will go further with the next engine I build...
Well I've been busy getting a few jobs done on the bike but progress has been slowed by the place where I ordered my parts from messing up the...
Hi I just checked the stud on my engine which is the same as yours and its a M6 so you would need an M6 kit. The diameter of my stud is 5.9 mm.
Hi. Whats needed is a helicoil insert as yellasei says, this is what they are. http://en.wikipedia.org/wiki/Helicoil Any good local engineering...
Hi Terro. By the line do you mean where the bottom of the stud is or the black casting line near where the reed block sits? And why shouldn't you...
I know exactly where your coming from with that one, its good to have a few projects on the go gives you something to day dream about. :) When...
Hi. another thing it might be is one of the main seals rubbing on the main bearing if its been knocked in too far or the main bearings not seated...
Hi surferdude. Nice looking bike, like the stealth black look. Contact adhesive should be just the ticket for sticking leather, it would probably...
Gave the grinding a go today and even though its a long way off finished im pretty pleased with the results so far. I've posted picture of it on...
Re: Gilera Ice Moped Mayhem Project Bit of an update. After looking at the new cylinder on the cases it was obvious the cases would benefit from...
Hi, I was wondering if its possible to remove the spring from the standard shock on my gilera ice? I want to remove it to get to it powder coated....
Cheers Terro, the chemical metal makes sense now you've enlightened me. Any other tips you can give would be gratefully received before I go for...
Re: Gilera Ice Moped Mayhem Project About the only rules on the engine are it must be 50cc or less and be 94db or less of noise from the exhaust....
Cheers Terro that is a great thread, thank you for the link. I have a good idea now of what should be done to the cases. Can't quite work out why...
Re: Gilera Ice Moped Mayhem Project I didn't use any glue just a good staple gun and stretched it over the seat and stapled it up on the under...
