The UK's biggest automatic scooter forum.
Separate names with a comma.
How easy are crank seals to change , is it engine in half job?
Yes replaced them with the same weight that came out
Erm slightly worse but not that bad,
Ye I was running fine before, and got a new plug and done a compression check got 100psi witch I was told was good.
Ye it has be up jetted to a 62 ages ago even before the Reving problem appeared.
Hello all was wondering if anyone could help, I have a NRG Power and for the past 6 months my revs are getting lower and lower and have now stoped...
70 was on the electric start but the battery died lol, so I reset the gauge and kicked it a couple of times and it stopped at 100.
Done a compression test the other day , it read 70-100 Psi but not sure if thats good or not?
Ye it is a full 70 kit ,with piston, barrels, and all the gaskets. I'll have a look tomoz at the things you suggested, thankyou,also would worn...
Well basically it had 7.2g rollers init and it used to do 70, replaced with the same g so it can't be the rollers, the bike used to rev over 7k...
Hello all, this has continued from my last post "power loss" I fitted new rollers as they were flat , still only revs to 7k used to go 9k , it...
Hello all, right my NRG Power Dd has gradually been loosing power over the last 3 months, it had a 2nd hand mallossi 70cc kit on it and I used to...
