The UK's biggest automatic scooter forum.
Separate names with a comma.
Ok lol well that's my set up ? Plus malossi reeds n standard crank lol It jus seems dead for what I've spent
I've managed to get my aerox on the road eventually :) thing is it jus aint fast enough :( here's the spec Polini sport 70s Stage 6 pro rep...
I thought about a compression test as im sure I could hear a slight kiss as I move the variator !! But I've now fitted my filter Nd put the...
Never thought about a mini moto one :) n I don't mind it being smaller lol I do general checks on the care every week so won't matter with 1 extra...
The tank is to big to even make a bracket lol I wanna fit a small tank inside my seat so I've still got the oil feed :) but I would need one made...
Fitted my subframe today then went to refit my oil tank to find out that it hits the sub frame and sits about 2 inches off where it's supposed to...
http://www.pedparts.co.uk/product/1126/stage6-double-layer-racing-air-filter I was looking at this one ? As it fits nice with the subframe ?
I can't use a air box as I've got a rear facing carb ! So ill buy the double filter and a pack of jets from 90 to 110
I've found a 75 jet that works ok but can't fit a filter :( and for some reason I have to full throttle as I kick to get it to start :( it's...
Got a aerox off my mate ! It's got polini sport 70s , endy exhaust, stage 6 subframe with stage 6 spacer and a 17.5 mm carb I've got a few jets...
I must have a problem then as I've got a 92 jet
Jets r done r runs ok haven't taken it on the road yet as its still in bits :( but what setup would b best ?
I bought a shitty aerox of a mate was a standard 50. I have put a polini sport 70cc kit, 17.5mm carb, a endy exhaust pipe, malossi reeds and a...
ok ive been looking about online and its confusin the shit out of me lol i think it gunna b easier if i pay my local garage n get him to get it on...
o i c lol wats the secondary jet and in guessin the air screw is the one near the air filter lmao
ok so if the plug is brown after full throttle its gd if its white its bad
thats good then lol its a slight brown colour atm lol how do i know if the jet im usin is to big or to small
ok well the only site i found that tells me says my bike has a malossi variator standard with 16 x 13 rollers which is a lie as the rollers r 15 x...
ok ill changed the jet back asap the standard one is a 47.5 and i have a 60 is this ok or to big ?? im unsure of the standard rollers weights as...
i have fitted my 70s kit with laser exhaust system.. i had the standard rollers in there with a 60 jet i had it running on a 30-1 premix with oil...
