The UK's biggest automatic scooter forum.
Separate names with a comma.
Anything considered as long as it all works. Other CN250 parts might be considered or even a cheap non runner??
No point posting the same problem as you will still get the same answers as the other post. If you can't do it maybe if you can't afford a garage...
Not quite sure why you included my answer in your last post??
Pages 47/48 show location of components pages 29/ 30 shows the screws to remove the upper front panel Your original unit will probably have 2...
As one of those old enough to remember, when it came in, the idea was to either force you to take the test or just do a car test as there was a...
To simplify even further if you are over 17 yes you can ride a 125 on L plates with your existing CBT but no passengers.
Definately sounds like a fuel fault so best to have the carb off and remove all jets and clean them out either with an air gun or get some carb...
The bulbs are wrong they should be 6v on the NP50 http://www.wemoto.com/bikes/honda/np_50_d_melody_mini/83/picture/bulb_rear_-_stop_and_tail_light/
As far as I can see the NP50 is 6v and the NB50 12v so if the NP50 is the one with a 6v battery and 12v bulbs the bulbs are wrong. Basically they...
Can't see that either the 6v battery is wrong or the bulbs.What years are the scooters?
Probably someone has put the wrong bulbs in??
It'll either be printed on the glass or stamped in to the metal on the bulb. Any bulb will do eg indicator if you can't get at the headlamp.If...
Take out a bulb and you'll see the voltage. Once that is established most battery sites have the dimensions of the battery so providing it fits...
Dead battery? Don't forget you'll be actuating the rear brake light and when you release it what voltage you have will go back to the ignition. If...
All it proves is you have a good earth and yes you do have some sort of wiring problem. You have twin filaments and one goes to the brake and the...
I think it's a lucas carbide setup. When you still had to MOT them the lamp was only considered decorative so wasn't tested. I shouldn't think you...
Are they carbide lamps?? If so basically you need calcium carbide which is generally put in the bottom chamber. Water goes in the top chamber....
[ATTACH] Notice how the battery is connected directly to the solenoid. The black "T" shape is the moving contact. When you push the starter...
There are NO positive/negative cables to the solenoid from the battery. The thick red wire is the positive feed to the solenoid direct from the...
You have to remember the stand also acts as a lever. You are not supposed to be trying to pull the scooter up/ back. Put your foot on the stand...
