The UK's biggest automatic scooter forum.
Separate names with a comma.
As long as the float isn't leaking it will as you get the needle valve in the kit. Take the float out and shake it to see if it has any petrol...
On my Typhoon 4T I just managed to get it out so that I could adjust the valves. I understand that it may be possible to release the rear shocks...
Basically no. You need one that will read graduations i.e a float.
Over time the gasket(seal) goes hard so no amount of tightening down will help. Not a hard job in itself probably more hassle trying to get access lol
Back on subject the guy asked if they were reliable and the answer is yes with the proviso you get one that hasn't been messed around with. Have...
Same as speedfight I believe?
You won't need to take out a loan lol http://www.racing-planet.co.uk/carburetor-repair-kymco-peugeot-yamaha-125mm-gurtner-p-176821-1.html#.WSW9d8a1vIU
Are not some Chinese models still 2 stroke? My own Speedfight 2 is 2009? According to this some Speedfight 3 models are 2 stroke?...
Yep that's the next area to look eg float etc. If you can actually confirm if the fuel is coming out of the carb intake then the problem is the carb.
Well there you go that tube goes to open air according to the video as he pulls it out near the start of the video. Why would fuel come out of the...
All the clamps etc look fairly new is this a new scooter? If so maybe it's still under warranty?
It would help if we knew the make/model but that looks like the fuel filter with the arrow on it so you have lost the supply to the carb. Have a...
Just a technical point a 125 is not a moped lol Anyway most 125 4 strokes will get to app 60mph with the possible exception of some Chinese...
Will another Leader engine fit as fitted to a lot of Piaggios?
I don't think they are that difficult especially when you don't have to split a gearbox like a bike. Could you reduce a workshop cost by taking...
Hmm doesn't look good. Even if you file it with needle files(which won't be easy) you've lost the depth or height on the splines and you can't...
Re the cheap ones it's possible I suppose but the teeth usually only wear if the outer pulley can move cheap alloy or not. I don't even check the...
Ok then that is definately your problem. The question now is why are the teeth wearing? If the nut is done up tight then the outer pulley should...
Yeah sorry I meant to edit it and had to do something else at home so it never actually appeared. Basically I asked to clarify if the outer pulley...
If the teeth on the fixed pulley are wearing either you are not getting it tight enough or the crank has damage and in that case all you'll do is...
