The UK's biggest automatic scooter forum.
Separate names with a comma.
Had 2 of mine stolen a month ago. A 125 Typhoon 4t and a 400 Burgman. I got the Burgman back within the week as it had been abandoned but despite...
Have a look just under the kickstart at the front lower edge of the belt cover. The numbers are usually there. The long normal number is just the...
Going back to the original post it has to be remembered he hasn't passed the test yet. The trip to Edinburgh is not a holiday and would be a...
If after double checking the timing and you are sure it is correct and the valve clearances are correct I can only suggest you remove the head and...
Assuming your timing marks are correct something is wrong as you appear to be 180 degrees out. Your valves should be closed when the camshaft...
Just to check when it locks up have a look at the cam and see if it's pressing one of the valves down.
Not far from me (Kettering) lol I used to get to Newcastle in 4 1/4 hrs in my truck at a steady 55 mph without stopping. I was assuming you might...
People have been all over the world on smaller things than a 300. I've been up there quite a few times and have done the most Northern coastal...
Sounds like you haven't got the timing marks lined up correctly and the valves are contacting the piston. You'll need to check you haven't bent...
See if the engine number has the prefix 1E40QMB. This means it has the Minarelli type Chinese engine. It was fitted to lots of scooters so you...
Ok but clean it up first and make sure the sliding pins are cleaned with wet and dry paper and then greased(lightly) with copper grease. Also...
http://www.independent.co.uk/news/uk/home-news/moped-crime-theft-overzealous-police-even-kills-them-former-senior-police-officer-david-videcette-a7...
Possibly if it's an aftermarket part and you have also fitted a bracket it is not lined up(or fitted) correctly. Do you still have the genuine one...
There's always a Piaggio MP3 trike as her car licence will probably cover trikes unlike now where you need a motorcycle licence. They made a few...
Plenty of info on the internet about making a holding tool if you haven't got an impact wrench. If you look at the variator fins there are usually...
You've just answered your own question lol Either an electric or air impact wrench does the job with no special tools required. Apart from that if...
If anything you might look for something bigger as most people find the 50cc lacking a bit. Great for poodling about on quiet country roads or in...
When you say the head I assume you removed the cylinder as well as it's a 2 stroke? I assume you have checked to see if you have a spark at the...
deetee did she get the cbt?
Yeah I fall in to that category. Just as every biker could do with a couple(or more) different bikes to suit their needs at any particular time eg...
