The UK's biggest automatic scooter forum.
Separate names with a comma.
2 strokes need a lot more maintenance and can take less abuse when it comes to jetting changes. A stock 125 2 stroke or 4 stroke isn't going to...
It should use the same mounts which are already on the case? Any piaggio mudguard should fit.
Not true at all. I've got a BGM 85mm con-rod 44mm stroke just sitting around doing nothing. Any 44mm stroke 85mm conrod is fine. You do realise...
As ramo said... If you plan on using a bike for anything but going in a straight line stop being stupid and leave it alone.
They are air cooled piaggio engines but with an insane mounting system that includes solid engine bushes so you don't actually replace anything on...
Generally with ZX's you are supposed to use flat "paper" gaskets and not the standard compression gasket. So I would do that if I was you.
You need the adjust the carb. Have you added all the other parts you should when fitting a sports exhaust? The main jet is only used for full...
Funny how some older members end up sounding more stupid than younger members... Anyone paying anything over about £500 for car insurance when...
Has the fuelling been adjusted at a dealer? That needs to be done.
http://www.gumtree.com/p/cars-vans-motorbikes/piaggio-x8-125cc/95110250...
Sr's are totally different when it comes to engine mounts. They are a complete pain in the arse and the labour charge is easily about right. It...
Welcome. Get some pics up of both.
[IMG] [IMG] [IMG] [IMG] [IMG] Should be the final pics before it goes.
[IMG] [IMG] [IMG] [IMG] [IMG] Sale specs are actually... Malossi 172kit - Ported Malossi Torque driver Malossi Secondary Gearup Malossi...
Your bike setup is completely different? So how would your roller weight be similar at all. Plus you do grease rollers if they are stock and your...
18%.. Can I have the few wasted mins of my life back now.
You should really post your question in the relevant section and not in the introduction section. You will get more replys. Welcome.
Because they are the best and most complete projects!
What are the full specs you have/are planning with the 94 then? You said in your post "ive had way to many 50's and 70's kits that have ended in...
LOL?! As above. If you can't get a 50 or 70 kit to run how the hell are you getting the 94 to? You need to do "flowing" just to get the kit to...
