The UK's biggest automatic scooter forum.
Separate names with a comma.
Yeah i keep forgetting only to be reminded when i see the pics on the screen.
My bad , that's wat i meant
I didn't say they were expensive , just a little dearer than a pattern stock form one , and as for putting more pressure on the rear wheel , it...
[IMG] [IMG] [IMG] [IMG] [IMG] [IMG]
NO
Fuel tap ? Try sucking the vacum line whilst cranking over to see if it starts then . Might be a blocked fuel line (cant see it being that...
a variator in a manual gearbox ? Theres probably a rev limiter in the cdi , i'd guess one of the wires has to be cut as this is the case with...
They are ok , bit of a mix match bike , derbi engine , aprilia type wheels and most electrics and components , and personally i cant get on with...
No such thing , peugeot make a variety of 100cc scooters as well as a few others like honda and yamaha but they are 4t . Nrg's didn't even come...
That is terrible advise , there's nothing wrong with stock suspension on a nrg , providing it WORKS as is should , just like 80% of nrg's out...
[IMG]
Yes the screw without the spring (the smaller one) is your mixture screw , get a pic up of the carb from the side as what you are adjusting...
So when you first start the bike all the lights work as they should? And moments later they just stop working and you are left with nothing but...
At that price , they are worth buying even if you don't need them . Build a spare engine from your old cases .
Far too underpowered , hey all are, yamaha xmax's are a much better bike with better engine and looks. Having said that , these x8's and x9's are...
To do it properly it's best to take the crank out as this way you have full access to it. However still fairly easy to do when in the cases, i...
remove the front pulley again and check the splines on the shaft for wear. The clutch is most likely seized on the shaft tapping with a rubber...
A good 70 bore kit is always a good start, polini,malossi. go down a gram or so on the rollers and re-jet as suited (do you have a pipe) , up jet...
engine mounts , there are 4 main ones in total , 2 bearings in the casings themselves , and 2 rubber bushes/silent blocks on the sides of engine ,...
the one with the big rubber over it looks like a temp sensor wire ,the two middle ones look like the earths to engine and the blue one looks like...
