The UK's biggest automatic scooter forum.
Separate names with a comma.
Work your way backwards and check over what you have done , check all electrical connections as you may have pulled something when removing forks...
It's a 1997 Honda CBR 900 RR Fireblade . Spec - Erm ... Completely rebuilt chassis including wheels , brakes and suspension and all other...
Cheers ramo Seen alot of GSXR and Ducati tails on these and a few CBR1000 ones too, wanted something different yet keep it fireblade related so...
Work in progress ... [ATTACH] and thank god for the new page
You said the voltage at the battery when running is 14.5, is that on idle or when revved? Should be about 12.5 at idle . Unregulated voltage will...
I'd get the air cover for cylinder first . Maybe even check for heat seizures. open the case and find out what the squeel is yourself , it's a...
Do the lights come on when ignition is on but not running ,its probably a ac lighting circuit and i would check the bulbs are all correct ? As...
have you checked spark , fuel and compression ?
Just buy the jets man , they are cheap enough . You need to find out the stock jet size first and go from there.
i had that once , turned out to be a blocked exhaust . When was the last time it was serviced ?
Check the fuel tap isn't free flowing and flooding overnight . Just remove the fuel line and see if it pours out , if so replace the tap. Or fit a...
Check the fuel cap seals properly and the tank overfill is clear, the aerox has the fuel tank fill at the rear where the seat is right? drain the...
The wiring on the dash circuit board rots out on them , i've had a dodgy fuel gauge sensor too before. You can try repairing the circuit with...
Cut it off and replace the studs , but this seems very excessive . (cant believe i just said that )
You have a flat battery , replace or recharge (if it takes charge). Then when you have a good battery do a charge system check to make sure it's...
Take the side case off and have a look , possibly cooked the clutch but untill you have a look you are not going to know really.
You still need to drop roller weights and upjet marginally when fitting a pipe to a stock barrel.
True , had several offers , just nothing tempting enough to part with her . Everyone wants it yet no one is splashing the cash . Btw , split...
Better yet , just buy a lc bike ?
Rollers are too heavy , what's the size of the main jet ?
