The UK's biggest automatic scooter forum.
Separate names with a comma.
sounds like a main bearing has given up the ghost to me, although it could be something like s sheared woodruff key on the flywheel.
[img] stolen from aprilia forum because i cant be arsed to take my own pic :P
usually because the plug has been over tightened at some stage.
top-end gasket sets are £6.99 plus post...
1 is the neos ac or lc? 2 if you can helicoil it or drop an insert in it then go for it, its not a huge job. you will need a new head gasket set...
start from stock. MOST aeroxes are fitted with 12mm carbs, i beleive the stock jet is about 86? could someone confirm? worth checking the numbers...
Had this with my area-51. best thing to do is whip the rear wheel off and spin the clutch outer with your hands, if there is any noise or...
if it's not already been said, a good second-hand aprilia habana would be a nice scoot, with most of the depreciation gone and the parts backup...
chances are you have the correct weight rollers now but too small on the outside diameter, therfore not allowing the pulleys to come together far...
the washer is actually a spacer between the outer and inner pulley of the flywheel, it sits over the smooth shaft and stops the 2 halves of the...
hi bud, sorry for the delay, step-dad decided yesterday of all days to go out on it. anyways, from the top clockwise it's Black with white...
got one sat outside, will take pics tomorrow evening as i'm out early in the morning. pm me to remind me.
yeah, bvasically its just dumping too much fuel in, a 60 would be about right for a kit and an exhaust i would say. give it a go though, i would...
sounds good in theory, the other thing to do is manually advance the pump by pulling the cable when the engine is running, keeping the bike rpm...
depends how far you want to go really, the best way is a piaggio 125 conversion. if you are sticing with the 100 lump though i would go down the...
yeah, get onto them about it. even if nothing comes of it, at least they know there's a quality issue so it shouldn't happen again. nice one...
not decided yet and yea i did have 2, sold the other to my boss
Exhaust is fiddly but easy enough, its 4 bolts (or 2 bolts and 2 nuts) just remember to put the gasket in between the pipe and the barrel. to...
good choices for a stock setup. ideally you want to invest in a set of digital medicine scales to weigh your rollers. no you set your roller...
nothing that fancy, got the base model in bleck (the torque bike for anyone who's ever seen the film) [img]
