The UK's biggest automatic scooter forum.
Separate names with a comma.
I've had good luck with those tins of plastic primer paint
Choke. I did a guide a while back on how to clean the choke jet in a carb.
Normally reeds have a tiny gap, like sometimes totally new ones do. Buy yeah, a petrol leak isn't going to affect your vacuum pump. But thinking...
Got the roof on the volvo. Finally. No more wet head driving in the rain. Going to be sad to see it go.
Hi welcome. Get your self a mallossi over range kit or whatever its called. It's a kit with variator, rollers and clutch springs and belt.
I wouldn't do a leak down test til after I had checked the comp and reeds. But it's a fair point. Often when a bike has been stood, the crankcase...
[ATTACH]
The wire. They seem to stop working quite quickly, I've replaced a few on warranty, maybe like 20 or so over the years
Possible that the reeds have eaten the rings, no compression and no negative pressure in the carb....
Reeds?
I put the graeme book up here somewhere under guides i think. If I recall it's taken from the tip of the diffuser if that makes sense? Been about...
That's just oil pressure I guess. I'm not sure how much the oil pumps put out. As long as the gasket is good on the cover I wouldn't worry too much
Huh? Have you put the valve cover back on?
Good point. This will be helpful for people googling this.
Yeah that could work maybe.
It's just to start it up and let it idle for a few mins, then turn it off and let it cool down again, then do the same, but give it a bit of...
Gave my licence in to vegvesen in exchange for a Norwegian one. Fucking brexit. Urghhh
I think they are special to the bike. Have a look at the clamp for the stem
I've done thousands of motor rebuilds over the years....
Semi will work fine. Just remember to heat cycle it. And use some oil in the bore when you are assembling it all. I always use synth myself, but...
