The UK's biggest automatic scooter forum.
Separate names with a comma.
yeah you will be loosing coolant out the expansion tank , it will smell hot when running , and the temp gauge will be through the roof , also the...
so we have spark , have compression , is the plug wet when you pull it out if not its a fueling problem
i think around the 5 gramme mark buddy
it should be fine mate , might have to change the rollers to suit the new exhaust's power band though mate
have u checked for a spark if so was it yellow or blue ? it needs to be bright blue , carb sounds fine most use a 25mm though
yes about 10 x better mate
yeah man sound
that's not too bad really mate , id uprate the reed valve as well while i was there
yeah mate which ever carb you get will be a improvement of that gurtner !
yeah the gurtner carbs are shite lol , and id stick a bigger inlet on and a gilera runner sp 125 carb (20.5mm dellorto )
yeah i wouldn't trust no fucker round by me , they would probably thieve my panels lol , and yeah that's sound then , you thinking of a bigger...
yeah it is ah mate , i never did body and paint i just did car mechanics for 3 years makes working on little 2 strokes a peace of piss really ,...
i no yeah same here fella must of spent ££££'s these past 6 years on bikes lol wish i was back at college though saved me a fortune in tool's and...
yeah most learner bikes and scooters never have mate every bike or scooter iv had as been shagged and have had to work on them but at least it...
i no mate £ 5.55 for the gaskets , £ 10 for rings , £ 3 quid for plug , £5 for coolant so not to dear do all the work me self saves me £100 quid...
sure as mate been running like shit and wont go into the power bands so took the head off to find white sludge in my combustion chamber, so head...
yeah mate may as well you will probably get off lucky though , iv got to rebuild my rs's top end this week the joys of 2 strokes lol
sound then mate , yeah id just give the carb a good clean , fit your new choke , and a new plug in case its fouled due to the faulty choke for the...
yeah does sound like a sticking choke , but just to rule out compression even if you don't have a tester remove the plug and cover the hole with...
have you put a little bit of 2 stoke down the oil gallerys that go to the crank bearings should be one either side , the crank should spin nice...
