The UK's biggest automatic scooter forum.
Separate names with a comma.
Did you clean it or did you take the carb apart? did you check all the connections/pipes are on correctly and tight? did you check the jets...
As you have already bought it and are planning on a 70 kit then you may as well wait til fitting the 70 kit, that way you don't buy jets for the...
Rev limiters don't usually cut in til stupidly high RPM anyway (something like 8-10k rpm if I remember right) obviously depending on the model....
tried a new plug?
try start it with the throttle fully open.
Sounds more like an electrical problem as it sounds like the petrol is getting through. Are the rings on? have you checked for compression and...
It will sort out the grinding but if there's still a problem behind the pulley it doesn't fix that problem.
If it didn't matter they wouldn't say "point the arrow to the exhaust port" :rules:
Yes mate. you turn the key on and the lights can be turned on and off by the switch regardless of the bike running or not. so the lights must run...
It is wired up right, everything on the alarm is working, alarm turns on and off, can remote start and stop the bike just a need a way for the...
Make sure you block up that little hole if you leave the pipe off otherwise extra air can get it making it run a bit lean.
Check the belt and rollers.
I have a immobilizer/alarm/remote start fitted to my Typhoon 125. It was pretty much plug and play once you figure out what the hell each wire is...
The running in doesn't exactly matter, it's a used barrel, only a new piston. Don't worry about the running in really. if it was a full new kit...
Arrow to the exhaust. I would suggest putting the piston slightly into the barrel, put a piston circlip in one end, then slide the whole thing...
Never mind, I've got it sorted.
what jet was in your old carb? It's better to start with a higher jet and work down, not the other way round.
Well I would think not setting it up before fitting is your problem. I'm sure someone will be able to suggest a good size for your set up.
Did you rejet the carb for your bike or just stick it straight on out the box?
Hey, I recently got a new 20mm mikuni carb (VM20) as mine was having a few leaks thanks to broken gaskets. I put in all the same jets. worked...
