The UK's biggest automatic scooter forum.
Separate names with a comma.
Read this: http://www.pedparts.co.uk/blog/stage-6-pro-replica-exhaust-triumphs-exhaust-shootout
Read this blog to help you make your mind up http://www.pedparts.co.uk/blog/stage-6-pro-replica-exhaust-triumphs-exhaust-shootout
The derestriction kit means that they remove the restrictor washer from the exhaust and yes you will have to upjrt to 68. The upjetting is easy,...
Yes, the purpose of upjetting is to ensure that the engine has the correct fuel to air ratio. The variator controls the operation of the drive...
You will need to upjet the carb or it will run lean and could damage the piston. But you won't need to change the clutch springs, simply the...
If your running an open filter it could be getting too mutch air. The standard airbox is best with the snorkel removed.
Yup, thats a good start. but you may find the stage 6 rep exhaust will give better performance (highly recomended by Pedparts). I've used both and...
That's a good start and with the stage 6 exhaust you should see good results.
Thanks, it surprising how you soon pick it up once you start playing with them. If you've got some spare cash ditch the standard variator theyre...
Is the starter motor turning over the engine?
No, that's it , it just looks a little different in the photo. On the photo the spacer seems to be in 2 parts with the washer inbetween. On the...
Shit you'd need a pilots licence for that,
Not seen one quite like that before but it looks like the restrictor, take it out to get extra top speed and replace the weights with 4.5g as a start
I had the same with a clutch which wouldn't fit, the seller was apologetic, refunded my money and told me to bin the item. Fair enough.
The spark plug is screwed into the cylinder head.
8.2g! you could use them as sea fishing weights.
Is it a Silly, Gilly?
Do you mean the thick one?
Provided that your crank is in good order Take it easy and it should be okay for a short period.
I meant the size of the hole in the jet, not the thread size. Your main jet will be marked with the bore of the hole. if this hole is too small...
