The UK's biggest automatic scooter forum.
Separate names with a comma.
It would be simple to wire in by taking a live feed to a switch and on to the fan then connecting an earth wire.
I take it that youve tried adjusting the idle screw (Left hand of carb nearest air filter) and mixture but if that is not working it may be the...
I've got a top racing (doppler) full circle crank (10mm small end) coupled to a stage 6 streetrace 70 kit and both a Leo Vince zx and stage 6 pro...
I'm lucky my old man keeps me in line and usually thinks at least three steps ahead of me. He won't let me waste money on things he knows won't...
That's cool mate (I understood it all and it's good to have someone with a good grasp of engineering on board)
He probably has, but not an upgraded one, LOL. No seriously Thats one thing you don't really need with a Polini sport 70 kit because it loses...
The other option to help with the cooling is to fit a fan . A small 12v fan can fit infront of the radiator with a switch to engage it when you...
With my streetrace and 17.5 dellorto (standard airbox, snorkel removed) I run an 84 main jet, any bigger and it just bogs. I had the same issue...
What about a variator and carb? I run a streetrace with a standard waterpump, it can get a little warm during hot weather and lower roadspeed, I'm...
I bow to your knowlege and your ability to use a calculator, but arn't you overcomplicating things a bit. The poster knows that his crank will not...
I agree with what you say about a methodical approach and that is what I have taken based on personal experience supported by a lot of research...
This seems to be a common issue with 70 kits and bigger carbs, setting up the main jet is okay but setting up the pilot jet and in partiicular the...
I'm not surprised that you havn't seen many in that colour, cos they've all rusted away.
It could be the weather, my rox runs like a pig when the air temperature rises. It messes up the mixture then runs fime when it's cooler.
What filter are you using?
My iphone.
This is the transition between the pilot jet and the main jet, you may be able to improve it by adjusting the height of the needle. try raising...
In that case use loctited nuts to fix them.
The plate is threaded and there's no need for nuts.
I run a streetrace with a 17.5 carb, it wheelies off the throttle.
