The UK's biggest automatic scooter forum.
Separate names with a comma.
Also worth checking all engine earths are connected well, as if not the engine trys to use the CDI connections as grounds which kills it...
Its the resistor pack for the LED back light... :tup:
Roller size is different too according to piaggio... 19mm for the 125 and 20mm for the 180...
Actually, the fuel pressure in the system is normally about 7.5-8.0Bar... Air Pressure is about 5.0-5.5Bar, the 2.5Bar is the fuel pump pressure...
You also need to watch the oil used in the ditechs, it has to be API-TC++ rated, which 95% of commonly sold oils are not... its due to the fact...
New piaggio 125 4t models have an external electric water pump nowadays...
New shape models run H8 bulbs... which are 35W
Ive got one with minor scuffs.... now doing an insurance repair on one with most panels...
If its a 50 it wont have an overflow pipe as its a sealed battery. YTX4LBS about £10-£15 retail, and...
Haha... same with the chinky Zips... first job is ditch the oil as its like lumpy honey... and upjet to a 78.
Well its not often i get to tell you ya wrong Minor... but ya wrong! The Euro 3 engines were jetted down to meet emission laws, not just the...
They aint too bad, but panel fit is dodgy and electrics are budget... The older versions are 2T and much quicker than the 4T version obviously.
Well if its dont the same thing 3 times, sounds like results of a problem not purely ring failure ;)
Being Cast iron they take a good beating and still survive... changes are it spat the ring out the port into the exhaust...
Nah Piaggio engines all the way :bird:
Carbon Lorraine are by far the best big bike pads available, and have never been beaten in any bike mag test... ;) Expensive yes... but the...
Rubbish... Gold fren are awful... might get away with em in a ped with no weight, try em in a real bike... they overheat and come off the...
New SR50 is a very good looking ped... NRGs do still look good, didnt like the early powers, but the latest look better for the race graphics,...
Malossi pads are rubbish... The Best pads money can buy are Carbon Lorraine sintered. If not get some EBC-HH pads... they came 2nd ;) All...
Heat the pipe up with a hairdryer or heatgun until its at least warm to the touch, ideally hot to the hand... it makes the VHT paint stick and...
