The UK's biggest automatic scooter forum.
Separate names with a comma.
is there any play in the crank ends. It could be the bearings are worn
If you remove the kick from the outer casing making sure the cog and shaft cant drop through... from the outside of the shaft there SHOULD be a...
Yes it all started in 1989 the year before my bike...Yamaha had the copyright on it for 10 years and everyone scoffed at it. It was leagues in...
its a valve in the exhaust that regulates the back pressure...in effect tuning the exhaust to a given revs. It gives more bottom end and quietens...
theres usually an allen bolt or similar in the bottom of the leg that holds the toob in
A good fully charged battery SHOULD put out 14.4V if its 13V its fooked
are they a similar set up to the ZIP? If so, theres a throw gear that moves outwards as it rotates (large cog on inner casing attached to kick...
keeping the front down from the lights is the main prob for me and the fact that the clutch is the EXUP achillies heel..they dont like high RPM...
The smaller 2 stroke would have the edge at first due to it being alot lighter but as soon as the superbike comes on cam in fist gear the 2 stroke...
If you want a lift for a bike as opposed to a scoot then I've done some plans for one I made based on the abba stand idea simple to make if your...
stuck switch at the handlebar end
oh, and as for signage, I FOUND (cough) one of the round 30mph signs, removed the numbers and changed it to 190 :p
I've a bike lift but cant remember the make...bought it second hand off ebay about 4 years ago, its the version that also works off the air supply...
see, always check the obvious first :D glad you got sorted
wheres the best place to get parts...need some front pads but no-one local stock pit bike stuff
when it gets anywhere under 2mm at the rear its burnout time ;) [IMG]
dont know your particular scoot but things like speedfights have a particular fuse just under the footboard access area that controls all the...
what sort of voltage is the battery putting out....should be 14.4V when fully charged Have you tried jump leads...if everything works then its...
first thing is to degrease all the area so you stand a chance of seeing where its originating from in the first place
if its gearbox oil and theres no drain plug, use a large syringe and a length of tubing to syphon it out...might take 10 mins or so tho'
