The UK's biggest automatic scooter forum.
Separate names with a comma.
jeans & sweatshirt... follow the link below the image for the story
Personally I cant believe how many ped riders dont wear gloves :eek: its the first thing to go down when you have an off...a natural instinct to...
if the locks are weak enough to be forced that'll allow you to gain access and be able to change the lock cylinder for a new one with key
theres keycutters and theres KEYCUTTERS (insert LOCKSMITHS)...the latter can dismantle a lock to its basic levers and build the lock to fit a key...
or even take it to a local key cutter and have a full one cut :confused: if you do get the part key out, give the lock a spray with wd40 before...
why sell the ped?????? If you MUST do your test, certainl do but you can still ride the ped when you've passed either a car (if it still applies)...
if you dont want to strip it, swill the cases with petrol a few times and then use a petrol/oil mix in the same ratio as pre-mix. Leave it to...
They've been trying to introduce type approval since the early 80's. It was the Germans that started it all and then the Japanese introduced a...
postage no prob, do you have any pics plz
So if you've tried the plug in the lead against the barrel and theres a good spark, fuel getting through (is the plug wet when its in the barrel...
if you unplug the switches and then try, you wont have a circuit so the light shouldnt work anyway o_O
If the HT lead was off, its more than likely the spark under the bike will be the ignition arcing from the cap to the nearest metalic part...it'll...
it said 161 on mine and it was still going ;) :D
need a brackett that will support approx 60mm diameter end can let me know if you've got anything thats near...pictures and sizes would be good...
The brake light will be activate solely by the switch (probably located at the lever). Either theres a poor earth or the switch is sticking...
use a sat nav in battery mode strapped to handle bars
err... need a liink
whats the spec and price?
check discs for run out, tyre pressures are OK and wheel bearings dont have any play. Does the noise change/increase with revs or speed or both
