The UK's biggest automatic scooter forum.
Separate names with a comma.
there a screw in the glove box, 2 at the bottom that go through from inner panel to front fairing, one in the centre at the front, 2 at the top...
I use AA coz they cover the person AND cater for bikes For me its better to be able to jump in my wife or sons cars and breakdown knowing the...
might just be the camera but at approx 4 'o clock theres looks to be some staning around the inner race
welding is the better optiona dnmore permanent. Chemical metal would be OK as a temp fix but it doesnt have a lot to get hold of as a key
any play in the rear wheel? it may be a bearing thats on its way out...they click like a push bike pedal crank sometimes
advice for 16 year olds ...put one on the end of it! :p
if its doing it on idle without the wheel moving then it wont be the gearbox
also make sure the taper on the crank end and corresponding hole in the flywheel are spotlessly clean on reassembly. The precision surfaces are...
drift the new seals to the same depth as the existing...just be careful when you're putting them over the ends of the crank that they're not...
sounds like you'd be better off with a classic policy. Only thing is the milage is usually limited (which can be increased for a fee) and you dont...
your original comment stated that a new one was always better to which I stated otherwise and gave evidence as to my reasoning...it wasnt meant to...
the brake rollers only move at a wlking pace..its about the torque and resistance forces being applied as opposed to the speed, plus some speedos...
My point is the fact that IF its the crank seal thats fooked.... it wont matter if you buy a new cylinder or rebore/hone the existing (cheaper...
if the crank seal is gone, thats prob whats caused the seize and the blowby
they take the odometer reading but dont check the speed calibation...how would they without actually taking it for a ride??????...which they dont....
I only bought our home due to it having a decent sized garage (dont tell the wife!) [IMG] unfortunately, with all the projects I have on the...
:D LOL I am currently choking after spitting half my drink into the screen That is MY sick sense of humour :cool:
I hate it when my place gets in a state like that. Its NEVER been totally sorted since I built it due to one project or another...plus everytime I...
what a load of bollox!!! It all depends on what type and quality of barrel lining you're dealing with! if its Nicosil coated then its a...
or simpler would be to have a ride to the test station and talk to the tester (most of them ARE human)...and its free
