The UK's biggest automatic scooter forum.
Separate names with a comma.
Upjet 10%, Ithink it's the same as an Aerox motor, so go from 62 to 68. Reduce your rollers try 4.5g and see how that is.
Ditto
Tend to disagree with Marsh, Boatian are built in China but to a higher specification tha similar looking bikes made at the same factory, Have a...
What about Boatian, these are built in China to a higher standard than similar looking bikes. Pedparts speak well of them and the back up is good....
Sym are made in Taiwan, they also make engines for Honda so there is no issue with the build quality. Kymco are very similar and either would be a...
The rims are fine, I've just got to change the front tyres to a 205.40.17. The 225.45.17 's fitted are too big.
What are you reeds like, if theyr'e damaged it will blow back through the carb and make a terrible racket. The base gasket fits between the crank...
What carb?
Is the base gasket Okay? could be losing compression or sucking air.
leo vince any time or a stage 6, rejet +10% around a 4.5 - 5g roller weight (better still change the variator) and it should go well
Cast iron run in of 50 miles? your kidding, the rings will not have bedded in and you will be heading for some accelerated wear to the bore and...
what size carb?
Ideally you need an airgun (not to shoot it!) to remove it or you could try holding the clutch bell with an oil filter strap.
What state is the plug in does it get wet with fuel when it turns over. Humour me, try putting a short reach plug in cos if it's overfueling...
I've debadged the rear, The S badge is the tailgate handle so it's got to stay. I've got a facelift bumper for the front, so I might take that S...
Awe, come on Chubz put a better jubilee clip on the water pump.
What are they like ?
Nice comment Stig.
Remove the spark plug and use a compression tester, borrow one from a mate.
Do a compression test.
