The UK's biggest automatic scooter forum.
Separate names with a comma.
Its a new bike, and still under warranty so i dont wanna go too crazy, especially as the lad uses it every day, but this game is never ending......
All zip ones will fit... even the later hengtong copys.
Would a 20.5/21mm fit the original airbox? If not is there an airbox that would fit? Or is most of the gain coming from loosing the airbox and...
I need to talk him out of it i think.... he uses it daily so i must be able to convince him the gains wont be high enough for the set up times and...
Dont that all have mixture screws terro? I know some have that silly anti tamper screw type that you need the dellorto tool to turn (or thin long...
Fairly new machine, less than 1000km old... Has a shiny red lightened stator fitted, MHR rep cylinder, Gianelli Reverse Pipe, Gearup Kit, Athena...
Yes it will fit, just watch which wires you immobilize with it, as lots of the 2stroke wiring is AC not DC...
Especially if its a water cooled SR50... they wont over heat unless theres a problem. I would be looking at the oil pump/water pump drivegear and...
Did you fix what caused it to blow up in the first place?? If so what was it??
First thing to do is make sure its sealed properly.... if thats all fine, then i would assume the end can needs repacking. Buy some cheap...
Yes i have... and they are a pain in the bum for sure. Just remember these legs are not oil filled, and will leave a grease ring on the fork inner...
Standard rollers are pink coloured 19x15.5mm and weigh 7.2grams... when derestricted with the standard pipe they are recommended to be replaced...
The GP1 open has round indicators fitted to the number plate bracket, and has black blanking plates fitted to the rear panel where the indicators...
The standard seals are double lipped, so have 2 oil scraping surfaces.... which is more than enough... more sealing lips means more friction, some...
Mmm well the parts microfiche doesnt show it as a seperate part, only shows as coming with the entire fork assy... which is a bummer. They do...
Yes its fine... An HID kit only pulls 35w when running... just watch how you wire them in as they dont like AC voltage at all :good:
Carlube has a fully synthetic 2 stroke oil out, not the cheap nasty mineral red stuff you see in garages, but a orange coloured version with...
Hold the rear brake on... which will hold the clutch drum still... might also need a lot of weight on the back of the bike to hold the tyre...
Warranty is paying... so its getting everything brand new :grin:
Its a shame your not closer as im now rebuilding a 250 with nearly new everything, so you couldve done some research to see if anything was able...
