The UK's biggest automatic scooter forum.
Separate names with a comma.
PM'd
Re: Piaggio Zip SP Tuning Bits Forgot to say will do a discount on more than one item, PM me a list... Or £350 the whole lot.
A small lot of parts, some new and some used, mentioned below... Used parts are from a bike i just stripped on a 59 plate, with less than 300km...
Some piccys... Malossi TC Unit - Piaggio 50 fitment [img] Piaggio Zip GearUp Kit - USED [img] Malossi ReedBlock - Piaggio 50 Fitment [img]...
I know you mentioned the AC barrel... didnt know about the rest, ill head up into the loft and dig em all out...
Thats answered that then....
Theyve done loads of work for us, and have always been most helpful... although it has mainly been motorcross stuff... but they are main importers...
Grampian will do any work you require including supplying pistons... try them if you get stuck.
If ya end up wanting some engine bits ive got a few New and used malossi bits i got hold of before crimbo, all the new stuff was from a PX deal,...
Most semi synthetic and fully synthetic oils will mix fine, like has been said, its normally fully synthetic and mineral based oils that wont mix....
Ridden many, fixed many... not a fan. Handling is totally dreadful but masked but the mass of front end grip and machine weight... not to...
ZAPC461 = 50cc 2t carb ZAPC462 = 50cc 2t Purejet ZAPM461 = 125cc ZAPM462 = 200cc
RH side of the bike, on the frame rail heading upwards behind the passenger footpeg :good: [img]
Theres not much of a process... you just hack into it with a hacksaw :grin: Below is a print screen from the technical manual showing where......
The chinese HT leads are dreadful... the insulation lasts about 4 months before theres sparks shooting left right and centre to anything and...
Eeek red carlube 2 stroke oil... just seeing it sends shivers down my spine! :grin:
According to part numbers... no. Would suspect different flow rates, it will need to pump more oil per rpm as the engine is bigger on the 125, so...
One important bit of info is missing... hows the plugs colour? You can easily test the choke, remove it when cold, measure its entire length,...
Yeah i wouldnt be that stupid to remove it, its whats holding the bearings in place :lol: But i guess he was thinking about the bearing shields...
It sounds like either kickstart shaft, or its quadrant gear is moving and touching the variator. Make sure the kickstart shaft has the circlip...
