The UK's biggest automatic scooter forum.
Separate names with a comma.
easiest way to check if rings need attention is to do a compression test. If its dropped then whip the head off and measure the ring end gap and...
next time i'm polishing then i'll take photos of each step to help you out ;)
Run a 21mm and its spot on. Good power increase and it doesnt overfuel. Been clocked at 70mph
the bars are held in by a wedge thats pulled up the inside of the stem by the long bolt that you've removed. As the bolts tightened it pulls the...
^^^^but a bicycle doesnt have to be taxed or insured Ultimately, I dont see the problem in pushing it home as long as you have a receipt, the...
have the rollers been changed to suit the new set up?
always to the exhaust port
ots not cheap but look at the work involved... remove engine, total strip including splitting casings (may as well do the water pump seals...
if one of the pistons is free and moves OK ...clamp it to stop it moving. That way all the force will go to the stuck piston...works every time...
or you could simply have an engineer recut the crank end threads to the next size down maybe from M10 to M9 and then use a slightly smaller nut
I had a paddington bear that you would squeeze his back and the arms open, release and it'll grip the front brake cable. he got trashed but then...
if you see a potential on ebay, give them a holla by ask seller a question. many are happy to deal outside ebay to save on fees If you need to...
engine isnt ID but frame is you can swap engines over and simply notify DVLA of new number (which is what I did) D/R's can be a good way of...
need more detail.. do you mean when its stationary is it from the engine is it wheel wobble does it vary with speed or revs or both
I bought a zip SP that had been stolen recovered. Luckily I only bought it for the engine which was still good. Be prepared for it to be seized if...
And if used on a regular basis will wash all the grease out your bearings :eek:
^ I think you ought to give me that KE125 :D being as you've got 2many2strokes
Bought the EXUP in August 1999 RG125F ...had that for 7 years and still not finished the resto job. Currently a rolling chassis, panels in primer...
I used to use WD40 to clean and protect the alu in winter...regular spray on chrome exhausts and then a spray and wipe to clean them every so...
2 person job but 1 to hold/guide the forks out, the other to hold the back brake on and lift the bike backwards or if you have access to a lift,...
