The UK's biggest automatic scooter forum.
Separate names with a comma.
they have drum brakes but it is possible that they have been converted to drum if the battery is near the inspection panel for the spark plug then...
hes sayin hes got a spacer between the bore and the cases because of the 55mm crank needed to make the bike a 183 most people drop the port...
ahh thas a bit too far sorry mate
where abouuts are you based mate
you can wheelie any properly set up 70's really for more information on the kit have a look at this...
the pipe will come with rollers but they might still need changing according to ure setup i also wouldnt recomend the tnt carbs
runner forks will fit im not too sure about any other forks except the malossi and pm monster forks qhich cost quite a lot
nope they wont
lc ignition is only better on 125's or 17's 50's have the same ignition
i think thats a capelli stem and ive heard bad stories about them
the only other option is to bodge it on using the gilly rad and hoses then ull have the radiater in the same place where the gilly one goes and...
Re: VX Forks a couple mm till u can screw all the bolt things on
Re: VX Forks its not a straight fit you have to cut the headstock down a bit
get newshape zip sp panels and a zip sp rad and hoses should all mount on fine
if its a 125 then a typh or maybe even a gilly pipe should work fine
as said above check the frame numbers are even there and that they match the logbook and haven't been welded on lol also check near the centre...
and 125 typh looms are very rare
its easy they have them on scootercentre and most other part sites ure probably finding it difficultcoz ure searching for the typh 80 one just...
i liked it with the zip wheels and forks
its easy putting the bars on mate u might have a problem with the wiring
