The UK's biggest automatic scooter forum.
Separate names with a comma.
where are you, I am in Bedford. Depending where you are, I might be able to direct you to some one closer. I will do a write up on it sometime,...
on a Piaggio 13/39 is about +20%, and that is the choice ratio for sport kits, get the lowest you can, around this figure. You want to buy the...
on the bottom of the brass jet is indeed a number. as for the belt, some belts have a lot of torsion, and need running in, before they perform...
opposite, in for rich.
different bike, end of.
many times when crank bearings get tired, you will feel a vibration through the scooters foot boards. A quick DIY on the bearings is about £60 all...
that's something you need to research with the seller, I know for fact those by-passers work on speedfights, but your model is relatively unknown...
for some reason, the top performance gear-ups seem a little quieter than the rest, but they all whine at 40 plus. I love it, as it sounds like a...
if you do buy it, make sure you get the red master key, as limp mode is a immobilizer problem, and only allows 2000 rpm, before cutting the ignition.
It's a shame, as the compressor, the super charged version made a whopping 19bhp, but with the problems associated with it, not worth the hassle....
the hose that comes out of the head, and goes to the bottom of the radiator. If the thin pipe is leaking, it could be it over heated and developed...
if you do, you might get a bit more on a long downhill, on the flat will probably be slower, uphill will be chronic. It's a good engine, but needs...
the top of the engine is quite high, then the out-let hose goes downwards, so an air pocket develops that the pump won't shift...
did you bleed the air out ??
personally, I would run a mile from it, they are renown for electrical gremlins, especially on the ignition.
the danger isn't just stripping the threads or even shearing off the end of the crank, it is removing the end float out of the crank, which then...
only you know what you have done already with the carb, but most likely you need further tweaking, main jet and needle clip position.
The Yasuni Z is a good pipe, have one at home, but too expensive for what it is, the pro replica is a great pipe for the money, comes in chrome as...
I am selling the rev counter/temp gauge next time free listings occur for £45 posted. I have sold a bundle of stuff in the last two weeks, most...
check the magnet(s) are in place, the pick up in place, the continutity and connections of the cable ........... or buy an after market speedo.
