The UK's biggest automatic scooter forum.
Separate names with a comma.
hmmm...maybe try adjusting your needle...sounds like your jet may be too big. how does your plug look?
ok its hard to describe...the bike starts and idles fine...and takes off fine...but then the bike sounds like its stuck on 4,000 rpm even though...
or are you talking about the exhaust pipe being clogged? cause it does sound like the pipe it choking the bike....i tired a stock pipe and it was...
try to upgrade your pilot jet... i think main is over 3/4 throttle. what size rollers you have?
the bike starts right up but the damn thing wont rev...its doesnt sputter but doesnt rev either...i think maybe the main jet system in the carb is...
4 gram rollers were already too light tried moving the throttle body pin clip but havnt cleaned the carb yet....i thought a dirty carb would...
tried posting in another topic but no help....i have tried rollers from 4.1 gram to 7.5 gram and changing clutch springs and belts.... so i must...
Re: Zip70 new malossi variator but don't now what rollers get it fixed?
put everything together and fill it up with 50/50 mix of collant and water....then open the bleed nipple just a bit and start the bike. then you...
no prob bob
looking at some pics of plugs i may be running rich...the plug is black but the bike is not smoking much. i have a 21 mm carb and a 85 main with a...
my runner had a weak spark...looked like the plug was sparking but no start....when i changed the coil it started right up
just pull the shifter off and then take the seal out by putting something between the seal and the shift rod and pry it out....maybe sure to lean...
Re: still bogging and i've tryed everything! you hold them up at the sky or a light and if you can see light through them and they are not...
the bike would be smoking if it was running that rich i think...im leaning toward the o ring in the plug...
i have ruled out the tranny....i tried even stock torque spring and belt and light rollers. the bike is smooth so it doesnt feel like its...
Re: still bogging and i've tryed everything! maybe your intake reeds
i went and got a propper belt and still nothing...belt sits better but bike is still not revving that good. i even tried 4.1 gram rollers in and...
still having trouble with my 70cc malossi typhoon. i tried setting the rollers and clutch and still nothing. so im thinking it carb or spark...
i sometimes hear a screeching sound when my clutch engages...i have changed my clutch springs to stage six medium strength....the problem is i...
