The UK's biggest automatic scooter forum.
Separate names with a comma.
maybe...it sit tight on the shaft but slides back and forth even though the belt and flywheel are bloted on....like its missing a spacer behind...
as in the variator is too skinny....or the roller guide on the sfaft is too long...
the rollers and slide fit...but once everthing is installed i can still move the variator assembly back and forth about an inch or 2....so there...
does anyone know the measurments of the typhoon variator?
my variator is still not closing all the way. i can see by the mark the belt is making it is bearly half way....ive tried all roller settng from...
is it a good exhaust? you should have gone with a Giannelli Reverse or something well known...you sure the pipe is on good and not leaking?
I was wondering what would be the easiest way to make an exhaust flange for a 70cc malossi kit and pipe...i am sure there is a leak between the...
im looking for a new exhaust now....a guy close by sells leo vince pipes....will thats be ok with an all malossi set up? 70cc, crank, variaotr,...
two ways you can do this 1- use a small socket to jam the teeth of the flywheel to the longhalf of the engine 2- use a spanner or screwdriver to...
im sure everyone has read about my 70cc typhoon. well the problem was the pipe....the pm tuning pipe i got from a friend was from a 100 or a...
i fixed the carb and it was a little better but not much....i tried it with the heaviest rollers i had....9 gram. and that works the best so far....
im going to try the 10 grams in the morning....my bike is reving alot better with the 9 gram and even reaching top rpms downhill...which it wasnt...
yea i guess so....cause with the light ones it wont...but with the heavier ones it gears up alot easier....and its still gearing up more downhill...
take off you air filter and see if your throttle body is sliding up all the way... right now i have 9 gram rollers in there and it is the best...
my carb wasnt opening all the way and my intake boot had a rip in it.....wooow is all i can say
its the damn throttle!!!!!!!! it was only opening halfway.....lol that sucks!!!
im gonig to ask my friend to borrow his 17.5 carb off his zip and see how it runs with that
is it possible the carb jets are keeping it from revving? mine revs up a bit and reaches maybe 30 mph but thats it.
yea its a 70cc malossi with a 21mm carb and malossi crank.
have you checked your reeds?
