The UK's biggest automatic scooter forum.
Separate names with a comma.
anyone hear of gas coming back up through the suction hose causing stuttering?
the 21mm carb has the suction hose for the gas and the oil inlet next to each other. the suction hose is see through and i can see oil getting...
what are the symptoms of having the wrong clutch springs? i have a zip 70cc malossi with 21 carb and sito plus. the clutch springs are origonal...
i think i would be tempted to keep putting money in this zip if i spend 300+ on a new muffler so i think ill keep the sito plus, downgrade my carb...
the acceleration is not smooth with 7.2 gram rollers so i am trying to find the right ones. ill try the origonal ones which are 6.5 i think....
i have a zip sp with 70cc malossi kit and 21mm carb and variator,. do i need to have a malossi reed box? the bike is not running good even with...
I did an engine swap with my typhoon engine and put it in a zip frame. the back brakes were working fine but now with the motor on the the zip...
when you rev the bike the variator should be moving together, sqeezing the belt, and pushing it up....this will cause the torque driver (where...
im sure it would fit...but water cooled is better...just fix the leak
only place would be a dealer or order one from online...most shops wouldnt stock that
it is the same side threading as the side pan bolts i believe. but they only have to be about 1/2 inch long
what about liquid gasket maker? ive sealed runners with it before...
could be...hold them up to a light or the sky and if you can see a crack between the reeds and the block try to replace them...sounds like a carb...
right...what he said
thats not why it siezed. i have done 70cc with standard crank and seen it done as well...just use your oil properly and run it in right and it...
check all your fuses....then start from your black box and work your way down....voltage regulator and through the wiring....check for voltage at...
could be a few things....it could have been something was put in the way is shouldnt have been, there was no oil getting to it, or maybe it should...
once there is current getting there thats the only thing it could be dude...id say go for it
ummm...id say start with a 76 main jet and put the needle in the middle...then check your plug after a good ride to see if you need to go bigger...
woow...nothing? i think ill take off my oil pump and pre mix...more of a consistant mix. then ill use my oil tank as a reserve tank with an...
