The UK's biggest automatic scooter forum.
Separate names with a comma.
what im getting at is any other performance mods except a 70cc kit won't affect this but will only improve it, for example a performance variator...
"The bike used was a completely standard 50cc Yamaha Aerox" That better?
"The bike used was a completely standard 50cc Yamaha Aerox. It's important to note that these results are only relevant to standard 50cc"
http://www.pedparts.co.uk/blog/stage-6-pro-replica-exhaust-triumphs-exhaust-shootout have a read of that mate ha
Okay i had my bike on the dyno today and my local motorbike shop and they adjusted the air/fuel ratio to be running perfect. It would cut out at...
think we are a little dramatic here, i understand your advice but i doubt it have damaged anything as there wasnt alot of blue smoke just a little...
recently fitted a 70cc bore mate, its scheduled to go into the garage tomorrow to get tuned on the dyno :) Ill try upjetting it.
would die slightly on full throttle and was producing too much blue smoke.
Hi i downjetted my 17.5mm carb 1 size and its running worst, dieing after i ease off throttle, shall i go 1 size up from what it was? thanks
pretty sure they are all the same
Yeh its a standard aerox exhaust, the pipes from memory are some sort of catalyst convertor (restrictor!) looks to me like they have been blocked...
Yamaha Aerox top speed is around 60mph easy :) it wheelie pretty good ;)
Yes Artek are an aftermarket brand. If you dont already get an aftermarket exhaust, stage 6 pro replica is the best for a 50cc engine in my...
Ran in now (about 350 miles) very fast still getting the mix of the transmission right but will be getting dyno tuned next week, wheelies with...
3000 kilometers i think im okay on the standard crank :)
You need to find out what make the spring is as they are mainly different colours from different brands, find that out and google it that will...
When it dies it wont start for about 5 minutes, ( i think it floods?) ill look into your ideas also PDBV
My 2011 Aerox dies when run at full throttle for about a minute, my thoughts are its over fueling as it will die, any ideas?
I changed mine from a 12mm to a 17.5 on my aerox most times the carb is made from different manufacturers. (For example mine was Guntner and my...
pull the clutch together to let the belt drop further down the clutch, gives you alot more slack in the belt. It will seem loose but once the...
