The UK's biggest automatic scooter forum.
Separate names with a comma.
Supposedly there was a metal "bridging wire" on the cdi circuit board itself if you cut into the silicone at a certain point. Removing this was...
A basic socket set will do to remove the CVT cover. The variator can be locked up to stop it moving with a carefully placed flathead screwdriver...
Helicoil is eay peasy. Comes as a kit. Drill out old threads with included drillbit. Use included tap to cut new thread. Wind in included helicoil...
Just checked, thats the right one. If you fit the original variator rollers there is no need to use the big spring included in the kit. Never...
The polini variator was offered as a kit including the drive belt when I had mine. It is available here...
They are maybe too stiff for a standardish bike and arent opening as far. I know switching to thicker reeds on mine cost me a little bottom end...
I had an sfx which was very similar. The variator is tiny on them and to derestrict properly a new one was required with a longer drive belt. I...
Maybe doesnt work properly. Do you remember the pens you used to get that would flash a light on top when your phone rang? Probaably works in the...
lets you know if your phone rings
Fitted the r1200 today, it runs very well on the sport pro cylinder. I have the clutch set to engage at 7k so it will happily lift the front wheel...
Assuming this is on a 4 stroke. I had a ybr 125 and fitted a leo vince system. With the baffle out it was very very noisy and lost a lot of power....
No they are to test out on the sport pro cylinder,if the exhust is too much for it I will keep it until I need to replace the cylinder for...
Wht do you think of the keihin pwk carbs? What are they like for setting up compared to dellorto phbg etc? Just asking as I have loads of...
Still no luck getting in contact with them. May try the phone, that should be funny trying to communicate lol. Im saving the money up to do...
Easiest way I found was freeze crank, put bearings into oven at 120C for 20mins or so, slide onto crank and refreeze the whole assembly. Then...
no worries, if you end up stick give me another shout :)
£40 for the speedo?
cheers
original restricted pipe taken off brand new bike. If I can win a yasuni c16 on ebay this week will have a chrome stage6 pro rep available with...
Fitted a set of malossi carbon reeds to zip today, only thing is that when you look down the open end of the reedcage you can see a sliver of...
