The UK's biggest automatic scooter forum.
Separate names with a comma.
yeah, before re-assembling, put the crank/bearings in the freezer and heat up your cases again. with this you will be well suprised how easy it...
hello and welcome, hope you find what your looking for fella :good:
hi mate, welcome :wave:
you really need to check for a spark, remove the plug, put it into the cap and earth out the plug on something metal on the scoot then crank over...
they will all fit but no, they arnt all the same.
yeah should do, that looks a crackin kit for the price mate :good:
it should really only leak out when pumped i suppose, i would try another master cylinder.
one of the best tools you can buy for tasks like that is a hot air gun, you can pick them up these days for a tenner and should last a while. use...
another trick i have used is backbleeding, use a syringe full of fluid, attach to the bleed nipple, open the nipple and push the fluid in from the...
as stig says, still fast if it has the original, non-powervalve motor. in my opinion powervalves don't add power they just make a motor more...
a little known fact, blue tac does the same job ;)
that purple phoon in the middle pic :good: i was looking at that the other day whilst looking for inspiration for mine :cool:
normal car paint should be fine, the tranny case doent get too hot.
try a cable tie around the lever with it back to the bars over night, this sometimes helps to get the air out of the system, also if you find...
hi guy's, my 125 typhoon has the bracket as part of the frame for a side stand, is anyone selling one that will fit this bracket??
tbh, i would run the standard air box and filter and jet up/down to that. with my experiance, i have found that you really need a lot of tuning to...
never been a fan of NRG's...........but hey mate, thats nice :good: lookin good :mod:
hello and welcome :wave:
buy a tin of carb cleaner, remove the k&n, spray a quick blast of carb cleaner into the intake of the carb as you turn the motor over. this should...
it sounds like the pair of them might have knackered cdi/imobilisers, a very common fault on the pugs. the crunching noise, is it from the tranny...
