Search Results

Search Again
Page 2 of 7
  1. Husky510
    Post

    Aerox 70 kit from old to new!!

    I am inclined just to run a pod filter
    Post by: Husky510, Jul 3, 2012 in forum: The Workshop
  2. Husky510
    Post

    Aerox 70 kit from old to new!!

    Yes had no snorkel from the start.... I moved the needle two notches up, then one notch down... then a notch below middle.. and still quite...
    Post by: Husky510, Jul 3, 2012 in forum: The Workshop
  3. Husky510
    Post

    Aerox 70 kit from old to new!!

    I have tried an 83 with the airbox and its just not punchy of that fast. I put the 95 back in with no airbox, and it popped a big wheelie down...
    Post by: Husky510, Jul 3, 2012 in forum: The Workshop
  4. Husky510
    Post

    Aerox 70 kit from old to new!!

    Are changing the reeds super important for now??? No one in OZ has in stock, and I dont feel like pulling my other bike apart to get to my Malossi...
    Post by: Husky510, Jul 2, 2012 in forum: The Workshop
  5. Husky510
    Post

    Aerox 70 kit from old to new!!

    I noticed my pilot jet is a 38.... and yours is a 27... will that still work???
    Post by: Husky510, Jul 2, 2012 in forum: The Workshop
  6. Husky510
    Post

    Aerox 70 kit from old to new!!

    Yeah its way too loud without the airbox... the neighbours wouldnt like it... so I have to make the airbox work. Not sure... just says...
    Post by: Husky510, Jul 2, 2012 in forum: The Workshop
  7. Husky510
    Post

    Aerox 70 kit from old to new!!

    I actually copied you with jet size... It had a 95 standard jet in the 17.5 carb but it wouldnt run with it.. so i pulled the airbox of and it...
    Post by: Husky510, Jul 2, 2012 in forum: The Workshop
  8. Husky510
    Post

    Aerox 70 kit from old to new!!

    Took my bike for a ride today. mods are a streetrace 70, S6 Pro rep, Polini variator with 4.0g weights. Stock carb 80 jet, stock reeds, stock air...
    Post by: Husky510, Jul 2, 2012 in forum: The Workshop
  9. Husky510
    Post

    Aerox 70 kit from old to new!!

    100 on a stock 12mm carb??
    Post by: Husky510, Jul 1, 2012 in forum: The Workshop
  10. Husky510
    Post

    Aerox 70 kit from old to new!!

    I decided to put the S6 kit in my stock 2008 aerox... What size jet should I be running with the stock carb on a streetrace
    Post by: Husky510, Jul 1, 2012 in forum: The Workshop
  11. Husky510
    Post

    Aerox 70 kit from old to new!!

    I am running a Koso gauge. It has a temp reading on it. I am running a 92 jet at the moment.. so may go to a 100 and try that.
    Post by: Husky510, Jul 1, 2012 in forum: The Workshop
  12. Husky510
    Post

    Aerox 70 kit from old to new!!

    I haven't tried going full throttle cause I am still running it in.... Cuts out towards higher rpm... Around 10,000 rpm
    Post by: Husky510, Jun 30, 2012 in forum: The Workshop
  13. Husky510
    Thread

    Aerox 70 kit from old to new!!

    Been running a streetrace 70 for a while, but was dissapointed to see heavy scoring on the inlet side of the piston. Compression was down so I...
    Thread by: Husky510, Jun 30, 2012, 67 replies, in forum: The Workshop
  14. Husky510
    Post

    aerox backfire

    jetting is 48/92
    Post by: Husky510, Jun 24, 2012 in forum: The Workshop
  15. Husky510
    Post

    aerox backfire

    I just had my aerox tuned by a local scooter shop last week... it goes alot better... I gave it to him with 3.5g rollers and he said now that it...
    Post by: Husky510, Jun 24, 2012 in forum: The Workshop
  16. Husky510
    Post

    S6 Pro rep work on a 50cc Aerox???

    your probably right, but the evidence is the bike pulls to 90klms/h nicely, no spluttering, no hunting etc. burns very cleanly.... and the bike is...
    Post by: Husky510, Jun 24, 2012 in forum: Newbie Scooter Tuning
  17. Husky510
    Post

    S6 Pro rep work on a 50cc Aerox???

    80 jet fixed it ..... no more light.. runs great!!! :D
    Post by: Husky510, Jun 24, 2012 in forum: Newbie Scooter Tuning
  18. Husky510
    Post

    S6 Pro rep work on a 50cc Aerox???

    I don't want to go leaner ... The plug is almost white
    Post by: Husky510, Jun 23, 2012 in forum: Newbie Scooter Tuning
  19. Husky510
    Post

    S6 Pro rep work on a 50cc Aerox???

    Ok so its going alot better with 3.5g weights.... Changed the standard 62 jet to a 73 jet. I went on a long ride but if you hold it anymore for...
    Post by: Husky510, Jun 23, 2012 in forum: Newbie Scooter Tuning
  20. Husky510
    Post

    S6 Pro rep work on a 50cc Aerox???

    still standard jet.... but it should still atleast do over 20mph with 4.5g weights
    Post by: Husky510, Jun 18, 2012 in forum: Newbie Scooter Tuning
Showing results 21 to 40 of 139 Next >
Search Again
Page 2 of 7