The UK's biggest automatic scooter forum.
Separate names with a comma.
No I followed them for a few minutes called 999 and they say they can't deploy any units as it would be pointless as they aren't allowed to chase...
Police say they can't do anything. Even though I see it riding past my house several times within one hour early this morning. Decided to go out...
well, forget about everything guys. It's been nicked earlier today. Thanks for all your help anyways
Another question, my bike used to go around 50mph at about 8.5k rpm but I replaced the rollers as they were worn and now it only hits 30mph and...
Thanks everyone! Oil problem sorted. The red and white wire was almost completely disconnected from the pin that goes into the connector! Not...
Tried both methods a few more times but no luck. If I start the bike up with the carb input pipe off the pump, it squirts one drop of oil out but...
If it says "disconnect the oil union from inlet pipe" what does that mean? The oil tank side of the pump or the carb side? I do have premix in the...
Just found online, merlin was right about everything but I'm meant to hold the throttle open for 10-15 seconds whilst I turn the ignition on. That...
Fair enough. Familiar with pitbike and crossers but oil injection and all this fancy stuff means nothing to me when I see it lol. It definitely is...
Yeah. Had a look at everything. Seems fine no loose or corroded connections, tried unplugging but makes no difference.
It is a Peugeot speedfight 3 2T AC. Merlin seems to know the system. It has a electronic oil pump injection system and no it's never gone empty
Merlin, I tried this thing what you said, I didn't seem to hear or see anything happening :/ very confused lol. On my cdi, it says langfang...
So without the bike on, just the ignition? And leave it for a while and it should come out? Is that what you're saying yeah? Gonna give it a go a...
Thanks merlin. The bike does cut out when I either go over around 5.5/6k rom or below 3k rpm. It won't start for another around 20 seconds after...
Is there anywhere else I can contact you? Trying to sort this out but don't have hundreds pounds to take to a garage. :/ my carb is clean now too....
Just checked rollers, they Are fine :/
Thanks Tamiyacowboy. I've checked My oil level and the tank is 3/4 full... :/ strange one I know my way round An engine but this has baffled me
I have a Peugeot speedfight 3 2T moped. Had this problem start about 2 months ago, slowed down at a junction and my oil light started flashing...
