The UK's biggest automatic scooter forum.
Separate names with a comma.
Runs fine when warmed up, but from cold I can rev it and get nothing, or the engine will die. New Spark, new air filter, cleaned carb, no joy :(
Took carb off cleaned gunk out. Working.
1. Started to take up to 10-15 presses to start from cold. 2. Pump won't Prime at all. Gone from 3-4 pops, to 1, now none. 3. Pulled the hose...
When I used to turn my key before firing the engine, I could hear between 3-4 pump noises as if there was air filling somewhere. Now it doesn't...
Sorted. Oil Pump Pipe had split, and clip at end had rotted. Thanks to my mechanics for being top blokes as per!
Lambretta Model D,or C, as mentioned.
Hole in exhaust or secondary exhaust.
Noticed the oil lamp flicker the other day. oil had dripped from the filter, but not sure how long this had been happening. Tightened the filter...
Just passed MOT, but for the past few years been advised the headlamp beam is aiming high. I'd have thought (after removing the front central...
Had to... there was no other fuel type available. Never again though, feels a lot lumpier. Found a nearby pump with E5 gonna have to frequent...
Do you reckon it's worth travelling the extra few miles to find & fill up on E5, or is E10 safe enough to use? No mention of this anywhere so far...
Sorted. There's barely enough finger grab/wiggle space, but it can be done. The connector is a squeeze to release type too.
I have. However it's far deeper than the front panel, almost behind the radiator somewhere.
Mine has gone to pot, so I have decided to buy a new one as the garage has a shortage at the mo'. I have followed the cable to the connecting...
Stator motor was shot! Part of the wiring coil was totally split and frayed, blackened and burned throughout, and the rotor was welded stiff.
Well, set off to work this morning, and can't get above 16mph ( around 20 on the clock). Just juddering like a b$"^%$£d. Checked plugs, checked...
Thanks for the help. Appreciated. The battery is quite new, less than 1 year old. Replaced it and nothings changed.
Not had new rollers in over 3 years. Do you reckon this could be a case of the bogging issue I have just developed? At any rate do you think I...
Black angled. Prices are ludicrous. between £17 and £30.
What size/Length/Angle model do I need for a GILERA VX? Been searching fruitlessly on eBay for ages. Cheers.
