The UK's biggest automatic scooter forum.
Separate names with a comma.
It seems like he didnt lol
That sounds trippy! haha Is sounds stupid but make sure your bat is good and wired up correct. If you have a multimeter check to see what its...
Get Greedy on it!!
If the carb is well used and worn try lowering the needle (rase the circlip) making it a tuch leaner. To check the carb needle jet, romove the...
So you have done all that on a standard jet. start of 10 higher. eg if it was an 86 go 96. Then do some plug readings. If you done all that on...
Nipple may be damaged or striped. Pull it right out and check it.
What do you mean it sucks it back in? Once you get fluid coming out the caliper close the nipple. Top up the master cylinder then open the...
Fully wound in is max rich. Get a new plug.
If take off is the problem run stiffer clutch springs. malossi do sets of diffrent tension springs
Yep there is a small harness plugs into. Runs along the inner guard. Off the main frame beam.
I cant say without seeing it. The four lights connect togeather (black wires) to a black plug I think. That plug connects to the harness.
Be good if you had a CDI you could try
Ok if the plug is wet then fuel ant the problem. So the spark isnt yellow anymore? Last time I saw these symptoms was when someone had fitted a...
Maybe try a thicker petal? Make sure they fit exact. Have you taken the cage off? Over bending.
My speedfight 100 tuned runs 100 main jet. 1.00mm
I think you mean 0.50mm....5mm or 6mm is a Huge main jet! To be honest if 60 is the factory jet, I dont think that would be stopping it from...
Speedfights (most scooters) headlights and sidelights run of AC. Once the bike is started. brake lights, indicators run DC. Off the...
Yes it connects to the harness. If you have all the loom in the bike correctly its quite straight foward. From memory the harness plugs only fit...
Also if it will idle and run to 1/4 throttle fine thats when your main jet side of the carb begins to take over from the piolt jet. Make sure...
Oh so you didnt line up the key way on the crank. Also have to get the alternator lined up otherwise the timing will be out. Its very hard to...