The UK's biggest automatic scooter forum.
Separate names with a comma.
Exhaust wise, personal preference is leo vince tt, low cost and good power but if your going to put a 70 kit in it then buy a zx, rollers are a...
Vivacitys arent the fastest scooters by any stretch, but sports exhaust, upjet carb and change rollers, be the best thing for u to do mate
Wouldnt mess with cdi, you'll only ruin the bike, if you can derestrict standard exhaust then go for it, but you wont get much difference, and if...
what used to be nelsons?
Lower the roller weight, change torque spring behind clutch and change the clutch springs, it may lose you 5mph or so but personally id rather...
Battery isnt holding charge properly, but it was my fuse, only figured when i realised that i had no horn or indicators, thanks for the help guys,...
Turn mixture screw all the way in, then two and a half turns out, see how it goes amd just fettle with half turns till u get it spot on, could be...
Callum, thats all thats left, rings n piston, what garage did u take it to mate?
I cant get my head around this, so hope someone can help. I started my bike off electric start last night, rode just under 2 miles, turned bike...
lucky you get 55 out of it, you wont really gain anymore top speed so concentrate on acceleration
Yeah i checked over everything listed in this thread when he had his speedfight, could not wok out for the life of me why it would not run when...
Take jets out the carb and clean, if all clean, then sounds like your cdi has packed up, my friend had a 2007 100cc speedfight and his did the...
70, reliable, cheap are three things never to be used in the same sentence lol
I have a tt exhaust on my zip, running 5.5g rollers, seems pretty nippy to me, but all bikes differ.
Personal preference, 70 will cost more because of other areas u need to upgrade
Has anyone got this headlight on there zip? Id like to know how difficult it is to install? And also how do the led's work? Because my zip has...
although chrome does look nice, they do look real tatty after a while, i.e rust and general muck, i stick with standard colours instead of chrome
Std rollers are shorter in length though, as i said the malosso uses 19x15.5 mm rollers, so would 16x13 or 15x12mm rollers work ok in the variator?
Just wondering if anybody else has had the same problem as me with the multivar variator by malossi? It seems to be flat spotting rollers like...
But yes a leo vince exhaust that comes with rollers and clutch springs is a good choice as most of the hard work fanny'ing about finding the...
